Our recent tests have shown that there is an abundant source of fresh water in the air. When the relative humidity is at 50%, each cubic meter of air contains approximately 5 grams of fresh water. This technology can be leveraged to extract water from the air and provide a reliable solution for drinking water in areas that face freshwater shortages or water pollution issues.
we are dedicated to supplying drinking water that’s better for both people and the planet.
How does project oasis atmospheric water generator work?
The Air to Water technology leverages the natural humidity present in the air we breathe. The Air to Water Generators pull this humidity into the system, where it undergoes a conversion process to produce clean, condensed water. This water is then stored in our proprietary stainless steel tanks, before being filtered and purified to the highest standards. Unlike chemically treated water, the water produced by our systems is derived directly from the same air you breathe, providing a truly natural and pure source of drinking water.
Key highlights:
- 40% to 60% energy savings compared to our older technology.
- Newest Atmospheric Water Generators designed for a wide range of applications, from 20 liters up to 5000 liters per day.
- Guaranteed pure water production, even in low relative humidity environments, with the ability to surpass the rated capacity by 20% or more in high humidity conditions.
- 100% guaranteed elimination of sediments and bacteria. It’s important to note that while drinking water can provide some minerals and vitamins, it should not be relied upon as the sole source for the human body or ecosystem. Our natural environment, even from the Stone Age, has always relied on a balanced, holistic cycle of nutrients, which our technology aims to complement, not replace.
- In addition to providing clean, pure drinking water, your Air to Water Generator (AWG) also functions as a highly effective dehumidifier. By removing excess moisture from the air, the AWG helps to reduce the growth of mold, mildew, and other airborne allergens within your home or workplace.
The project oasis process
Our Air to Water Generators (AWGs) use an innovative Atmospheric Condensation process to transform the abundant moisture in the air into clean, purified drinking water.
Here’s how it works:
- The humid airflow is drawn into the AWG and passes through an exclusive eight-stage filtration system.
- The filtered air then enters the condensation unit, where the water vapor is converted into liquid water.
- The generated water undergoes an additional eight-step purification process to remove any impurities, contaminants, or microorganisms.
- The result is the cleanest, freshest-tasting drinking water, provided through a sustainable and reliable source.
The 8 step filtration process
Hepa Air Filter
It prevents dust and micro particles penetration of the device and cleans air
LED UV LAMP
Kills bacteria and microorganisms (located in the lower tank)
sediment filter
Eliminating dirt and particles having a diameter of over 5 microns
pre-carbon filter
Charcoal and coconut shells absorbing hazardous organic compounds, such as chlorine, pesticides and some volatile organic compounds
membrane filter
Ultraline eliminates particles smaller than 0.01 microns
Mineral filter
With minerals beneficial to the human body (calcium, potassium, magnesium and sodium)
sediment filter
Further filter the bacteria in the water pipe
LED UV LAMP
Kills bacteria and microorganisms (located in the lower tank)
Visit our showroom
To schedule an appointment or get a free demo at our Sai Kung showroom – G/F 1796 Po Tung Road, Sai Kung, N.T Hong Kong, please fill out the form below. We’ll respond within 2 business days.
